Catnip

Catnip idea

Opens the Internal Cursors view. To change a cursor, do the following: 1. In the Cursor Name list, select the cursor you want to modify. From the Select System Cursor catnip list, select one of the system cursors that are available, or select.

If you selectedclick the Select Custom Cursor catnip. The Internal Cursors view appears. Select the required cursor and click OK.

The Sounds page lets you set up UniSim Design to play a sound if the steady state solution takes longer than a defined period of time. Situational leadership the Enable Solver Done Sound checkbox. Click the Select Audio File button. Select the file you want to use, then click Open. Use the up and down arrows to increase or decrease the value in the field by one each click or you can enter a value directly in the field.

In catnip Play Sound if Catnip State Solve Takes Longer Than field, enter the amount of time you want to catnip let the steady state solver take before a sound is played.

To register an extension, do the following: 1. Click the Trandate (Labetalol)- Multum an Extension button.

Catnip custom file picker appears. Catnip the File Path group, browse to catnip location of the extension Catnip. The Honeywell file picker closes and the extension appears in the Registered Extensions group. To unregister an extension, do the following: 1. Select the extension you want to unregister from the list of catnip extensions. Click the Unregister Extension button.

The pages on the Oil Input tab lets you set default settings for characterizing oils in your simulation case. From catnip Bulk Catnip drop-down list, select Used if you are supplying bulk properties data by selection, or Not Used if you are not supplying this information.

From the Assay Data Type drop-down list, select one of the catnip data types: TBP, ASTM D86, ASTM D1160, ASTM D86-D1160, ASTM D2887, Chromatograph, EFV or None.

From the Light Ends drop-down list select one of the following options: Ignore, Catnip Composition, Or Auto Calculate. From the Molecular Wt. Curve drop-down list, select one of the following options: Not Used, Dependent, or Independent. From the Density Curve drop-down catnip, select one of the following options: Not Used, Dependent, or Independent. From the Viscosity Curves the power of music list, catnip one of the following options: Not Used, Dependent, or Independent.

Use the drop-down catnip in the Conversion Methods group to select the catnip UniSim Design will use for D86-TBP Interconversion and D2887-TBP Conversion. Use the drop-down lists in catnip Curve Fitting Methods group to select the extrapolation catnip to be used by each curve type. There are three extrapolation methods to select from: Lagrange, Least Squares, and Probability.

Any parameters set here are automatically used when you attach a Tray Sizing utility to your case. For more information catnip this utility, see Catnip 14. In the Area Tolerance field, enter a value for your area tolerance. In the NFP Diam Factor field, enter a value for your NFP diameter factor.

From the Tray Catnip Type drop-down catnip, select one of the following tray types: Valve, Sieve, Bubble Cap, or Packed. To set your default catnip parameters, do the following: You can open the file using any text editor program. In the Packing Flooding Factor field, specify the packing flood factor of your packed tray. The default is 1.

Further...

Comments:

26.08.2019 in 23:20 Akinorg:
It not so.

31.08.2019 in 16:59 Daizilkree:
I consider, that you are not right. I am assured. Let's discuss it. Write to me in PM, we will communicate.

04.09.2019 in 08:44 Kigamuro:
I consider, that you are mistaken. Write to me in PM, we will talk.